Expertise Help You To Meet Requirements & Expectations
Expertise Help You To Meet Requirements & Expectations
Expertise Help You To Meet Requirements & Expectations


For a specific nickel-based alloy, there are many variables in the specific environment, including: concentration, temperature, flux, liquid (gas) flow velocity, impurity, abrasion, cycle process conditions, etc.These variables can cause a variety of corrosion problems.These questions can be answered in nickel and other alloying elements.
Nickel retains its austenite, face-centered cubic structure until it reaches the melting point.This provides a degree of freedom for the ductile and brittle transition and greatly reduces the manufacturing problems associated with the co-existence of other metals.Nickel is more inert than iron and more active than copper in electrochemical sequence.Thus, nickel is more resistant to corrosion than iron in a reducing environment, but not as resistant as copper.The addition of chromium to nickel gives the alloy its antioxidant properties, resulting in a wide range of alloys that have the best resistance to both reductive and oxidizing environments.
Compared with stainless steel and other iron-base alloys, nickel-based alloys can contain more alloying elements in solid solution state and maintain good metallurgical stability.These factors allow for the addition of a wide variety of alloying elements, allowing nickel - based alloys to be used in a wide variety of corrosive environments.
The common elements in nickel-based alloys mainly include:
Nickel - provides metallurgical stability, improved thermal stability and weldability, corrosion resistance to reductive acids and caustic soda, and stress corrosion cracking resistance, especially in chloride and caustic soda environments.
Chromium - improve oxidation resistance and high temperature oxidation resistance, vulcanization resistance, improve pitting resistance, gap corrosion resistance.
Molybdenum - to improve the corrosion resistance to reductive acid, improve the resistance to pitting and interspace corrosion in chloride aqueous solution environment, improve the high temperature strength.
Iron - increase resistance to high temperature carburizing environment, reduce alloy cost, control thermal expansion.
Copper - increased resistance to reductive acids (especially those used in places where air is not circulating) and salts. The addition of copper to ni-cr-molybdenum-ferroalloy helps to increase resistance to hydrofluoric acid, phosphoric acid and sulfuric acid.
Aluminum - improves oxidation resistance at high temperature and aging hardening.
The combination of titanium and carbon reduces the intercrystalline corrosion caused by chromium carbide precipitation during heat treatment and improves the aging enhancement.
Niobium - combined with carbon reduces intercrystalline corrosion caused by chromium carbide precipitation during heat treatment, improves pitting resistance, interstitial corrosion performance and high-temperature strength.
Tungsten - improves resistance to reductive acids and local corrosion, strength and weldability.
Nitrogen - improve metallurgical stability, improve pitting corrosion resistance, gap corrosion resistance and strength.
Cobalt - provides enhanced high temperature strength and enhanced carbonization and vulcanization resistance.
Many of these alloy elements can combine with nickel in a wide range of components to form a single phase solid solution, which ensures that the alloy has good corrosion resistance in many corrosion conditions.The alloy also has good mechanical properties when fully annealed without the need to worry about the harmful metallurgical changes during manufacturing or thermal processing.Many high nickel alloys can be strengthened by solid solution hardening, carbide precipitation, precipitation (aging) hardening and dispersion strengthening.